DSO 1202S-0
DSO 1202S-0
Hantek Scopmeter DSO 1202S
Hantek Scopmeter DSO 1202S
Hantek Scopmeter DSO 1202S
Hantek Scopmeter DSO 1202S
Hantek Scopmeter DSO 1202S
Hantek Scopmeter DSO 1202S
Hantek Scopmeter DSO 1202S
Hantek Scopmeter DSO 1202S
Hantek Scopmeter DSO 1202S
Hantek Scopmeter DSO 1202S
Hantek Scopmeter DSO 1202S
Hantek Scopmeter DSO 1202S
Hantek Scopmeter DSO 1202S
Hantek Scopmeter DSO 1202S
Hantek Scopmeter DSO 1202S
Hantek Scopmeter DSO 1202S
Hantek Scopmeter DSO 1202S
Roll over image to zoom in
Click to open expanded view

DSO 1202S

940,00 €

100 in stock (can be backordered)

Hantek DSO 1202S (200 MHz) is a digital oscilloscope suitable for use in harsh industrial environments, but also for work in the field.

K Oblíbeným
Compare
K Oblíbeným
Compare
SKU: HTH1202S Categories: ,

Hantek DSO 1202S (200 MHz) Digital Handheld Oscilloscope

Impressive design, intuitive control and high-resistance finish make oscilloscopes in the 1000S series useful aiders not only in field work, but also in hard industrial conditions. All Hantek oscilloscopes offer a great price/performance ratio at the low-end segment of measuring technology and the DSO 1202S is no exception. The advantages of Hantek Handheld over its rival products are the more than five times larger sampling memory, very good interference resistance, more accurate mulitmeter offering a larger number of ranges, a higher quality color display with a longer diagonal 5.6“ (14.5 cm), intuitive control and a long lasting battery (6 hours for a single recharge).

DSO 1202S – main features:

• Isolated Channels
• Bandwidth: 200 MHz
• Rise Time: 1.8ns
• Sampling rate: 1 GS/s
• Record Length: 1M
• Measurement record storage (supports bitmap and CSV format)
• USB Host: support removeable disk
• Zoom function
• Multimeter function
• 32 automatic measurements
• Measuring cursors
• Advanced trigger modes: Edge, Video, Pulse, Slope, Over time, Alternative
• Screen storage
• 5.6“ display with LED illumination; 640×480 point resolution
• Dual-Window Design
• LabVIEW support
• Applications development support – Visual C, Visual Basic
• Math functions including FFT
• Quick offset calibration
• LAN: Optional
• Dimensions (mm): 240(L) x 165(W) x 50(H)

Multimeter parameters:

• Number of digits: 6000
• Measurement modes: U, I, R, f, diod test, continutity test
• Max. input voltage – AC: 600 V DC: 800 V
• Max. input current – AC: 10A DC: 10A
• True-RMS multimeter
• Input impedance: 10 M
• Isolated input: up to 1000 V
• Safety class: 1000 V CAT II and 600 V CAT III

Control Programme

The programme, which uses a pop-up menu, is user-friendly and easy to control. It is localized in English and includes a built-in help system. It features a whole range of standard functions frequently met with.

Linux support
• Kernel version – Linux2.6.30.4
• File system – Yaffs, Fat32
• Drivers – Sound Driver, Buzzer Driver, FPGA Driver, SPI Driver, USB Host Driver, LCD

Driver, USB Massstorage Gadget Driver
• Applications – Busy Box 1.

18.4, Mplayer, Watchdog, Gnupg1.4.11
• U-boot – u-boot-1.1.6

The device will meet the needs of measuring technology professionals, but also those of technical secondary school and college students as a multifunction aid for study. Its low price and quality technical design offer a high use value.

Package contents
Package includes:
1x Handheld DSO 1202S
2x Passive probe 200 MHz
1x Test probes for multimeter
1x Connecting cable 1,2m; USB 2.0
1x Power adapter
1x High quality nylon bag – Hantek
1x CD with software and Manual in English

Additional information

Weight 1 kg
Warranty

Model

Parameters

<p class="Default"><strong>Oscilloscope Specifications</strong></p>
<p class="Default"><strong>Horizontal</strong></p>
<table border="1" cellspacing="0" cellpadding="0">
<tbody>
<tr>
<td valign="top" width="194">
<p class="Default">Sample Rate Range</p>
</td>
<td colspan="2" valign="top" width="444">
<p class="Default">1GS/s</p>
</td>
</tr>
<tr>
<td valign="top" width="194">
<p class="Default">Waveform Interpolation</p>
</td>
<td colspan="2" valign="top" width="444">
<p class="Default">(sin x)/x</p>
</td>
</tr>
<tr>
<td valign="top" width="194">
<p class="Default">Record Length</p>
</td>
<td colspan="2" valign="top" width="444">
<p class="Default">Maximum 1M samples per single-channel; maximum 512K samples per dual-channel (4K,16K,40K optional)</p>
</td>
</tr>
<tr>
<td rowspan="2" valign="top" width="194">
<p class="Default">TIME/DIV Range</p>
</td>
<td valign="top" width="208">
<p class="Default">DSO1062S</p>
<p class="Default">DSO1122S</p>
</td>
<td valign="top" width="236">
<p class="Default">DSO1152S</p>
<p class="Default">DSO1202S</p>
</td>
</tr>
<tr>
<td valign="top" width="208">
<p class="Default">4ns/div to 40s/div, in a 2, 4, 8 sequence</p>
</td>
<td valign="top" width="236">
<p class="Default">2ns/div to 40s/div, in a 2, 4, 8 sequence</p>
</td>
</tr>
<tr>
<td valign="top" width="194">
<p class="Default">Sample Rate and</p>
<p class="Default">Delay Time Accuracy</p>
</td>
<td colspan="2" valign="top" width="444">
<p class="Default">±50ppm over any ≥1ms time interval</p>
</td>
</tr>
<tr>
<td rowspan="3" valign="top" width="194">
<p class="Default">Delta Time Measurement Accuracy</p>
<p class="Default">(Full Bandwidth)</p>
</td>
<td colspan="2" valign="top" width="444">
<p class="Default">Single-shot, Normal mode</p>
<p class="Default">± (1 sample interval +100ppm × reading + 0.6ns)</p>
</td>
</tr>
<tr>
<td colspan="2" valign="top" width="444">
<p class="Default">>16 averages</p>
<p class="Default">± (1 sample interval + 100ppm × reading + 0.4ns)</p>
</td>
</tr>
<tr>
<td colspan="2" valign="top" width="444">
<p class="Default">Sample interval = s/div ÷ 200</p>
</td>
</tr>
<tr>
<td rowspan="6" valign="top" width="194">
<p class="Default">Position Range</p>
</td>
<td colspan="2" valign="top" width="444">
<p class="Default">DSO1062S</p>
<p class="Default">DSO1122S</p>
</td>
</tr>
<tr>
<td valign="top" width="208">
<p class="Default">4ns/div to 8ns/div</p>
</td>
<td valign="top" width="236">
<p class="Default">(-8div × s/div) to 20ms</p>
</td>
</tr>
<tr>
<td valign="top" width="208">
<p class="Default">20ns/div to 80μs/div</p>
</td>
<td valign="top" width="236">
<p class="Default">(-8div × s/div) to 40ms</p>
</td>
</tr>
<tr>
<td valign="top" width="208">
<p class="Default">200μs/div to 40s/div</p>
</td>
<td valign="top" width="236">
<p class="Default">(-8div × s/div) to 400s</p>
</td>
</tr>
<tr>
<td colspan="2" valign="top" width="444">
<p class="Default">DSO1152S</p>
<p class="Default">DSO1202S</p>
</td>
</tr>
<tr>
<td valign="top" width="208">
<p class="Default">2ns/div to 10ns/div</p>
</td>
<td valign="top" width="236">
<p class="Default">(-4div × s/div) to 20ms</p>
</td>
</tr>
</tbody>
</table>
<p> </p>
<p class="Default"><strong>Vertical</strong></p>
<table border="1" cellspacing="0" cellpadding="0">
<tbody>
<tr>
<td valign="top" width="194">
<p class="Default">A/D Converter</p>
</td>
<td colspan="4" valign="top" width="444">
<p class="Default">8-bit resolution,</p>
<p class="Default">each channel sampled simultaneously</p>
</td>
</tr>
<tr>
<td valign="top" width="194">
<p class="Default">VOLTS Range</p>
</td>
<td colspan="4" valign="top" width="444">
<p class="Default">2mV/div to 5V/div at input BNC</p>
</td>
</tr>
<tr>
<td valign="top" width="194">
<p class="Default">Position Range</p>
</td>
<td colspan="4" valign="top" width="444">
<p class="Default">2mV/div to 200mV/div, ±2V</p>
<p class="Default">>200mV/div to 5V/div, ±50V</p>
</td>
</tr>
<tr>
<td valign="top" width="194">
<p class="Default">Analog Bandwidth in</p>
<p class="Default">Normal and Average</p>
<p class="Default">modes at BNC or with probe, DC Coupled</p>
</td>
<td colspan="4" valign="top" width="444">
<p class="Default">2mV/div to 20mV/div, ±400mV</p>
<p class="Default">50mV/div to 200mV/div, ±2V</p>
<p class="Default">500mV/div to 2V/div, ±40V</p>
<p class="Default">5V/div, ±50V</p>
</td>
</tr>
<tr>
<td valign="top" width="194">
<p class="Default">Selectable Analog Bandwidth Limit, typical</p>
</td>
<td colspan="4" valign="top" width="444">
<p class="Default">20MHz</p>
</td>
</tr>
<tr>
<td valign="top" width="194">
<p class="Default">Low Frequency Response (-3db)</p>
</td>
<td colspan="4" valign="top" width="444">
<p class="Default">≤10Hz at BNC</p>
</td>
</tr>
<tr>
<td rowspan="2" valign="top" width="194">
<p class="Default">Rise Time at BNC, typical</p>
</td>
<td valign="top" width="104">
<p class="Default">DSO1062S</p>
</td>
<td valign="top" width="104">
<p class="Default">DSO1122S</p>
</td>
<td valign="top" width="113">
<p class="Default">DSO1152S</p>
</td>
<td valign="top" width="123">
<p class="Default">DSO1202S</p>
</td>
</tr>
<tr>
<td valign="top" width="104">
<p class="Default">≤5.8ns</p>
</td>
<td valign="top" width="104">
<p class="Default">＜3.0ns</p>
</td>
<td valign="top" width="113">
<p class="Default">≤2.3ns</p>
</td>
<td valign="top" width="123">
<p class="Default"><1.8ns</p>
</td>
</tr>
<tr>
<td valign="top" width="194">
<p class="Default">DC Gain Accuracy</p>
</td>
<td colspan="4" valign="top" width="444">
<p class="Default">±3% for Normal or Average acquisition mode, 5V/div to 10mV/div</p>
<p class="Default">±4% for Normal or Average acquisition mode, 5mV/div to 2mV/div</p>
</td>
</tr>
<tr>
<td rowspan="2" valign="top" width="194">
<p class="Default">DC Measurement Accuracy,</p>
<p class="Default">Average Acquisition Mode</p>
</td>
<td colspan="4" valign="top" width="444">
<p class="Default">Measurement Type: Average of ≥16 waveforms with vertical position at zero</p>
<p class="Default">Accuracy: ± (3% × reading + 0.1div + 1mV) when 10mV/div or greater is selected</p>
</td>
</tr>
<tr>
<td colspan="4" valign="top" width="444">
<p class="Default">Measurement Type: Average of ≥16 waveforms with vertical position not at zero</p>
<p class="Default">Accuracy: ± [3% × (reading + vertical position) + 1% of vertical position + 0.2div]</p>
<p class="Default">Add 2mV for settings from 2mV/div to 200mV/div; add 50mV for settings from 200mV/div to 5V/div</p>
</td>
</tr>
</tbody>
</table>
<table border="1" cellspacing="0" cellpadding="0">
<tbody>
<tr>
<td valign="top" width="194">
<p class="Default">Volts Measurement Repeatability,</p>
<p class="Default">Average Acquisition Mode</p>
</td>
<td valign="top" width="444">
<p class="Default">Delta volts between any two averages of ≥16 waveforms acquired under same setup and ambient conditions</p>
</td>
</tr>
</tbody>
</table>
<p> </p>
<p><strong>Trigger</strong></p>
<table border="1" cellspacing="0" cellpadding="0">
<tbody>
<tr>
<td rowspan="3" valign="top" width="194">
<p class="Default">Trigger Sensitivity</p>
<p class="Default">(Edge Trigger Type)</p>
</td>
<td colspan="3" valign="top" width="130">
<p class="Default">Coupling</p>
</td>
<td colspan="5" valign="top" width="314">
<p class="Default">Sensitivity</p>
</td>
</tr>
<tr>
<td rowspan="2" valign="top" width="72">
<p class="Default">DC</p>
</td>
<td colspan="4" valign="top" width="117">
<p class="Default">Source</p>
</td>
<td colspan="2" valign="top" width="113">
<p class="Default">DSO1062S</p>
<p class="Default">DSO1122S</p>
</td>
<td valign="top" width="142">
<p class="Default">DSO1152S</p>
<p class="Default">DSO1202S</p>
</td>
</tr>
<tr>
<td colspan="4" valign="top" width="117">
<p class="Default">CH1</p>
<p class="Default">CH2</p>
</td>
<td colspan="2" valign="top" width="113">
<p class="Default">1div from DC to 10MHz;</p>
</td>
<td valign="top" width="142">
<p class="Default">1.5div from 10MHz to 100MHz;</p>
</td>
</tr>
<tr>
<td valign="top" width="194">
<p class="Default">1.5div from 10MHz to Full</p>
</td>
<td colspan="8" valign="top" width="444">
<p class="Default">2div from 100MHz to Full</p>
</td>
</tr>
<tr>
<td valign="top" width="194">
<p class="Default">AC</p>
</td>
<td colspan="8" valign="top" width="444">
<p class="Default">Attenuates signals below 10Hz</p>
</td>
</tr>
<tr>
<td valign="top" width="194">
<p class="Default">HF Reject</p>
</td>
<td colspan="8" valign="top" width="444">
<p class="Default">Attenuates signals above 80kHz</p>
</td>
</tr>
<tr>
<td valign="top" width="194">
<p class="Default">LF Reject</p>
</td>
<td colspan="8" valign="top" width="444">
<p class="Default">Same as the DC-coupled limits for frequencies above 150kHz; attenuates signals below 150kHz</p>
</td>
</tr>
<tr>
<td rowspan="2" valign="top" width="194">
<p class="Default">Trigger Level Range</p>
</td>
<td colspan="4" valign="top" width="132">
<p class="Default">Source</p>
</td>
<td colspan="4" valign="top" width="312">
<p class="Default">Range</p>
</td>
</tr>
<tr>
<td colspan="2" valign="top" width="73">
<p class="Default">CH1, CH2</p>
</td>
<td colspan="6" valign="top" width="371">
<p class="Default">±8 divisions from center of screen</p>
</td>
</tr>
<tr>
<td rowspan="2" valign="top" width="194">
<p class="Default">Trigger Level Accuracy, typical (Accuracy is for signals having rise and fall times ≥20ns)</p>
</td>
<td colspan="6" valign="top" width="208">
<p class="Default">Source</p>
</td>
<td colspan="2" valign="top" width="236">
<p class="Default">Accuracy</p>
</td>
</tr>
<tr>
<td colspan="6" valign="top" width="208">
<p class="Default">CH1、CH2</p>
</td>
<td colspan="2" valign="top" width="236">
<p class="Default">0.2div × volts/div within ±4 divisions from center of screen</p>
</td>
</tr>
<tr>
<td valign="top" width="194">
<p class="Default">Set Level to 50%, typical</p>
</td>
<td colspan="8" valign="top" width="444">
<p class="Default">Operates with input signals ≥50Hz</p>
</td>
</tr>
<tr>
<td colspan="9" valign="top" width="638">
<p class="Default"><strong>Slope Trigger</strong></p>
</td>
</tr>
<tr>
<td valign="top" width="194">
<p class="Default">Slope Trigger Mode</p>
</td>
<td colspan="8" valign="top" width="444">
<p class="Default">Trigger when < (Less than), > (Greater than), = (Equal), or ≠ (Not Equal); Positive slope or Negative slope</p>
</td>
</tr>
<tr>
<td valign="top" width="194">
<p class="Default">Slope Trigger Point</p>
</td>
<td colspan="8" valign="top" width="444">
<p class="Default">Equal: The oscilloscope triggers when the waveform slope is equal to the set slope. Not Equal: The oscilloscope triggers when the waveform slope is not equal to the set slope. Less than: The oscilloscope triggers when the waveform slope is less than the set slope. Greater than: The oscilloscope triggers when the waveform slope is greater than the set slope.</p>
</td>
</tr>
<tr>
<td valign="top" width="194">
<p class="Default">Time Range</p>
</td>
<td colspan="8" valign="top" width="444">
<p class="Default">Selectable from 20ns to 10s</p>
</td>
</tr>
<tr>
<td valign="top" width="194">
<p class="Default">Overtime Trigger</p>
</td>
<td colspan="8" valign="top" width="444">
<p class="Default">The leading edge: Rising edge or Falling edge; Time Setting: 20-10s</p>
</td>
</tr>
<tr>
<td colspan="9" valign="top" width="638">
<p class="Default">Alter Trigger</p>
</td>
</tr>
<tr>
<td valign="top" width="194">
<p class="Default">CH1</p>
</td>
<td colspan="8" valign="top" width="444">
<p class="Default">Internal Trigger: Edge, Pulse Width, Video, Slope</p>
</td>
</tr>
<tr>
<td valign="top" width="194">
<p class="Default">CH2</p>
</td>
<td colspan="8" valign="top" width="444">
<p class="Default">Internal Trigger: Edge, Pulse Width, Video, Slope</p>
</td>
</tr>
<tr>
<td colspan="9" valign="top" width="638">
<p class="Default"><strong>Trigger Frequency Counter</strong></p>
</td>
</tr>
<tr>
<td valign="top" width="194">
<p class="Default">Readout Resolution</p>
</td>
<td colspan="8" valign="top" width="444">
<p class="Default">6 digits</p>
</td>
</tr>
<tr>
<td valign="top" width="194">
<p class="Default">Accuracy (typical)</p>
</td>
<td colspan="8" valign="top" width="444">
<p class="Default">±30ppm (including all frequency reference errors and ±1 count errors)</p>
</td>
</tr>
<tr>
<td valign="top" width="194">
<p class="Default">Frequency Range</p>
</td>
<td colspan="8" valign="top" width="444">
<p class="Default">AC coupled, from 4Hz minimum to rated bandwidth</p>
</td>
</tr>
<tr>
<td valign="top" width="194">
<p class="Default">Signal Source</p>
</td>
<td colspan="8" valign="top" width="444">
<p class="Default">Pulse Width or Edge Trigger modes: all available trigger sources</p>
<p class="Default">The Frequency Counter measures trigger source at all times, including when the oscilloscope acquisition pauses due to changes in the run status, or acquisition of a single shot event has completed.</p>
<p class="Default">Pulse Width Trigger mode: The oscilloscope counts pulses of significant magnitude inside the 1s measurement window that qualify as triggerable events, such as narrow pulses in a PWM pulse train if set to < mode and the width is set to a relatively small time.</p>
<p class="Default">Edge Trigger mode: The oscilloscope counts all edges of sufficient magnitude and correct polarity.</p>
<p class="Default">Video Trigger mode: The Frequency Counter does not work.</p>
</td>
</tr>
</tbody>
</table>
<p> </p>
<p><strong>Acquisition</strong></p>
<table border="1" cellspacing="0" cellpadding="0">
<tbody>
<tr>
<td valign="top" width="194">
<p class="Default">Acquisition Modes</p>
</td>
<td colspan="2" valign="top" width="444">
<p class="Default">Normal, Peak Detect, and Average</p>
</td>
</tr>
<tr>
<td valign="top" width="194">
<p class="Default">Acquisition Rate, typical</p>
</td>
<td colspan="2" valign="top" width="444">
<p class="Default">Up to 2000 waveforms per second per channel (Normal acquisition mode, no measurement)</p>
</td>
</tr>
<tr>
<td valign="top" width="194">
<p class="Default">Single Sequence</p>
</td>
<td valign="top" width="322">
<p class="Default">Acquisition Mode</p>
</td>
<td valign="top" width="122">
<p class="Default">Acquisition Stop Time</p>
</td>
</tr>
<tr>
<td valign="top" width="194">
<p class="Default">Normal, Peak Detect</p>
</td>
<td colspan="2" valign="top" width="444">
<p class="Default">Upon single acquisition on all channels</p>
<p class="Default">simultaneously</p>
</td>
</tr>
<tr>
<td valign="top" width="194">
<p class="Default">Average</p>
</td>
<td colspan="2" valign="top" width="444">
<p class="Default">After N acquisitions on all channels simultaneously, N can be set to 4, 8, 16, 32, 64 or 128</p>
</td>
</tr>
</tbody>
</table>
<p> </p>
<p><strong>Inputs</strong></p>
<table border="1" cellspacing="0" cellpadding="0">
<tbody>
<tr>
<td valign="top" width="194">
<p class="Default">Input Coupling</p>
</td>
<td colspan="2" valign="top" width="444">
<p class="Default">DC, AC or GND</p>
</td>
</tr>
<tr>
<td valign="top" width="194">
<p class="Default">Input Impedance, DC coupled</p>
</td>
<td colspan="2" valign="top" width="444">
<p class="Default">1MΩ±2% in parallel with 20pF±3pF</p>
</td>
</tr>
<tr>
<td valign="top" width="194">
<p class="Default">Probe Attenuation</p>
</td>
<td colspan="2" valign="top" width="444">
<p class="Default">1X, 10X</p>
</td>
</tr>
<tr>
<td valign="top" width="194">
<p class="Default">Supported Probe Attenuation Factors</p>
</td>
<td colspan="2" valign="top" width="444">
<p class="Default">1X, 10X, 100X, 1000X</p>
</td>
</tr>
<tr>
<td rowspan="4" valign="top" width="194">
<p class="Default">Maximum Input Voltage</p>
</td>
<td valign="top" width="208">
<p class="Default">Overvoltage Category</p>
</td>
<td valign="top" width="236">
<p class="Default">Maximum Voltage</p>
</td>
</tr>
<tr>
<td valign="top" width="208">
<p class="Default">CAT I and CAT II</p>
</td>
<td valign="top" width="236">
<p class="Default">300VRMS (10×), Installation Category</p>
</td>
</tr>
<tr>
<td valign="top" width="208">
<p class="Default">CAT III</p>
</td>
<td valign="top" width="236">
<p class="Default">150VRMS (1×)</p>
</td>
</tr>
<tr>
<td colspan="2" valign="top" width="444">
<p class="Default">Installation Category II: derate at 20dB/decade above 100kHz to 13V peak AC at 3MHz* and above. For non-sinusoidal waveforms, peak value must be less than 450V. Excursion above 300V should be of less than 100ms duration. RMS signal level including all DC components removed through AC coupling must be limited to 300V. If these values are exceeded, damage to the oscilloscope may occur.</p>
</td>
</tr>
</tbody>
</table>
<p> </p>
<p><strong>Measurements</strong></p>
<table border="1" cellspacing="0" cellpadding="0">
<tbody>
<tr>
<td valign="top" width="194">
<p class="Default">Cursors</p>
</td>
<td valign="top" width="444">
<p class="Default">Voltage difference between cursors: △V</p>
<p class="Default">Time difference between cursors: △T</p>
<p class="Default">Reciprocal of △T in Hertz (1/ΔT)</p>
</td>
</tr>
<tr>
<td valign="top" width="194">
<p class="Default">Automatic Measurements</p>
</td>
<td valign="top" width="444">
<p class="Default">Frequency, Period, Mean, Peak-to-peak, Cycle RMS, PRMS, Minimum, Maximum, Rise Time, Fall Time, + Width, – Width, + Duty, – Duty, Base, Top, Middle, Amplitude, Overshoot, Preshoot, Pmean, FOVShoot, RPREShoot, BWidth, Delay 1-2 ↑, Delay 1-2 ↓, LFF, LFR, LRF, LRR, FFR, EFRF</p>
</td>
</tr>
</tbody>
</table>
<p> </p>
<p><strong>General Specifications</strong></p>
<table border="1" cellspacing="0" cellpadding="0">
<tbody>
<tr>
<td colspan="2" valign="top" width="638">
<p class="Default"><strong>Display</strong></p>
</td>
</tr>
<tr>
<td valign="top" width="194">
<p class="Default">Display Type</p>
</td>
<td valign="top" width="444">
<p class="Default">5.6 Inch width TFT Display</p>
</td>
</tr>
<tr>
<td valign="top" width="194">
<p class="Default">Display Resolution</p>
</td>
<td valign="top" width="444">
<p class="Default">480 (Vertical) X 640 (Horizontal) pixels</p>
</td>
</tr>
<tr>
<td valign="top" width="194">
<p class="Default">Display Contrast</p>
</td>
<td valign="top" width="444">
<p class="Default">Adjustable (16 gears) with the progress bar</p>
</td>
</tr>
<tr>
<td colspan="2" valign="top" width="638">
<p class="Default"><strong>Probe Compensator Output</strong></p>
</td>
</tr>
<tr>
<td valign="top" width="194">
<p class="Default">Output Voltage, typical</p>
</td>
<td valign="top" width="444">
<p class="Default">About 5Vpp into ≥1MΩ load</p>
</td>
</tr>
<tr>
<td valign="top" width="194">
<p class="Default">Frequency, typical</p>
</td>
<td valign="top" width="444">
<p class="Default">1kHz</p>
</td>
</tr>
<tr>
<td colspan="2" valign="top" width="638">
<p class="Default"><strong>Power Supply</strong></p>
</td>
</tr>
<tr>
<td valign="top" width="194">
<p class="Default">Switching Adatper</p>
</td>
<td valign="top" width="444">
<p class="Default">AC Input:100-240VACRMS,0.6A MAX,50Hz/60Hz; DC Output:12V,2A</p>
</td>
</tr>
<tr>
<td valign="top" width="194">
<p class="Default">DC Input</p>
</td>
<td valign="top" width="444">
<p class="Default">DC8.5-15V,2A</p>
</td>
</tr>
<tr>
<td valign="top" width="194">
<p class="Default">Power Consumption</p>
</td>
<td valign="top" width="444">
<p class="Default"><30W</p>
</td>
</tr>
</tbody>
</table>
<p> </p>
<p><strong>Meter Mode</strong></p>
<table border="1" cellspacing="0" cellpadding="0">
<tbody>
<tr>
<td valign="top" width="194">
<p class="Default">Maximum Resolution</p>
</td>
<td colspan="3" valign="top" width="444">
<p class="Default">6000 Counts</p>
</td>
</tr>
<tr>
<td valign="top" width="194">
<p class="Default">DMM Testing Modes</p>
</td>
<td colspan="3" valign="top" width="444">
<p class="Default">Voltage, Current, Resistance, Capacitance, Diode & Continuity</p>
</td>
</tr>
<tr>
<td valign="top" width="194">
<p class="Default">Maximum Input Voltage</p>
</td>
<td colspan="3" valign="top" width="444">
<p class="Default">AC : 600V DC : 800V</p>
</td>
</tr>
<tr>
<td valign="top" width="194">
<p class="Default">Maximum Input Current</p>
</td>
<td colspan="3" valign="top" width="444">
<p class="Default">AC : 10A DC : 10A</p>
</td>
</tr>
<tr>
<td valign="top" width="194">
<p class="Default">Input Impedance</p>
</td>
<td colspan="3" valign="top" width="444">
<p class="Default">10MΩ</p>
</td>
</tr>
<tr>
<td colspan="2" valign="top" width="335">
<p class="Default"><strong>Meter Specification </strong>Range</p>
</td>
<td valign="top" width="161">
<p class="Default">Accuracy</p>
</td>
<td valign="top" width="142">
<p class="Default">Resolution</p>
</td>
</tr>
<tr>
<td rowspan="6" valign="top" width="194">
<p class="Default">DC Voltage</p>
</td>
<td valign="top" width="142">
<p class="Default">60.00mV(manual)</p>
</td>
<td rowspan="6" valign="top" width="161">
<p class="Default">±1%±1digit</p>
</td>
<td valign="top" width="142">
<p class="Default">10uV</p>
</td>
</tr>
<tr>
<td valign="top" width="142">
<p class="Default">600.0mV</p>
</td>
<td valign="top" width="142">
<p class="Default">100uV</p>
</td>
</tr>
<tr>
<td valign="top" width="142">
<p class="Default">6.000V</p>
</td>
<td valign="top" width="142">
<p class="Default">1mV</p>
</td>
</tr>
<tr>
<td valign="top" width="142">
<p class="Default">60.00V</p>
</td>
<td valign="top" width="142">
<p class="Default">10mV</p>
</td>
</tr>
<tr>
<td valign="top" width="142">
<p class="Default">600.0V</p>
</td>
<td valign="top" width="142">
<p class="Default">100mV</p>
</td>
</tr>
<tr>
<td valign="top" width="142">
<p class="Default">800V</p>
</td>
<td valign="top" width="142">
<p class="Default">1V</p>
</td>
</tr>
<tr>
<td rowspan="5" valign="top" width="194">
<p class="Default">AC Voltage</p>
</td>
<td valign="top" width="142">
<p class="Default">60.00mV(manual)</p>
</td>
<td rowspan="5" valign="top" width="161">
<p class="Default">±1%±3digit</p>
</td>
<td valign="top" width="142">
<p class="Default">10uV</p>
</td>
</tr>
<tr>
<td valign="top" width="142">
<p class="Default">600.0mV(manual)</p>
</td>
<td valign="top" width="142">
<p class="Default">100uV</p>
</td>
</tr>
<tr>
<td valign="top" width="142">
<p class="Default">6.000V</p>
</td>
<td valign="top" width="142">
<p class="Default">1mV</p>
</td>
</tr>
<tr>
<td valign="top" width="142">
<p class="Default">60.00V</p>
</td>
<td valign="top" width="142">
<p class="Default">10mV</p>
</td>
</tr>
<tr>
<td valign="top" width="142">
<p class="Default">600.0V</p>
</td>
<td valign="top" width="142">
<p class="Default">100mV</p>
</td>
</tr>
<tr>
<td rowspan="4" valign="top" width="194">
<p class="Default">DC Current</p>
</td>
<td valign="top" width="142">
<p class="Default">60.00mA</p>
</td>
<td valign="top" width="161">
<p class="Default">±1.5%±1digit</p>
</td>
<td valign="top" width="142">
<p class="Default">10uA</p>
</td>
</tr>
<tr>
<td valign="top" width="142">
<p class="Default">600.0mA</p>
</td>
<td valign="top" width="161">
<p class="Default">±1%±1digit</p>
</td>
<td valign="top" width="142">
<p class="Default">100uA</p>
</td>
</tr>
<tr>
<td valign="top" width="142">
<p class="Default">6.000A</p>
</td>
<td rowspan="2" valign="top" width="161">
<p class="Default">±1.5%±3digit</p>
</td>
<td valign="top" width="142">
<p class="Default">1mA</p>
</td>
</tr>
<tr>
<td valign="top" width="142">
<p class="Default">10.00A</p>
</td>
<td valign="top" width="142">
<p class="Default">10mA</p>
</td>
</tr>
<tr>
<td rowspan="4" valign="top" width="194">
<p class="Default">AC Current</p>
</td>
<td valign="top" width="142">
<p class="Default">60.00mA</p>
</td>
<td valign="top" width="161">
<p class="Default">±1.5%±3digit</p>
</td>
<td valign="top" width="142">
<p class="Default">10uA</p>
</td>
</tr>
<tr>
<td valign="top" width="142">
<p class="Default">600.0mA</p>
</td>
<td valign="top" width="161">
<p class="Default">±1%±1digit</p>
</td>
<td valign="top" width="142">
<p class="Default">100uA</p>
</td>
</tr>
<tr>
<td valign="top" width="142">
<p class="Default">6.000A</p>
</td>
<td rowspan="2" valign="top" width="161">
<p class="Default">±1.5%±3digit</p>
</td>
<td valign="top" width="142">
<p class="Default">1mA</p>
</td>
</tr>
<tr>
<td valign="top" width="142">
<p class="Default">10.00A</p>
</td>
<td valign="top" width="142">
<p class="Default">10mA</p>
</td>
</tr>
<tr>
<td rowspan="6" valign="top" width="194">
<p class="Default">Resistance</p>
</td>
<td valign="top" width="142">
<p class="Default">600.0</p>
</td>
<td rowspan="5" valign="top" width="161">
<p class="Default">±1%±1digit</p>
</td>
<td valign="top" width="142">
<p class="Default">0.1Ω</p>
</td>
</tr>
<tr>
<td valign="top" width="142">
<p class="Default">6.000K</p>
</td>
<td valign="top" width="142">
<p class="Default">1Ω</p>
</td>
</tr>
<tr>
<td valign="top" width="142">
<p class="Default">60.00K</p>
</td>
<td valign="top" width="142">
<p class="Default">10Ω</p>
</td>
</tr>
<tr>
<td valign="top" width="142">
<p class="Default">600.0K</p>
</td>
<td valign="top" width="142">
<p class="Default">100Ω</p>
</td>
</tr>
<tr>
<td valign="top" width="142">
<p class="Default">6.000M</p>
</td>
<td valign="top" width="142">
<p class="Default">1KΩ</p>
</td>
</tr>
<tr>
<td valign="top" width="142">
<p class="Default">60.00M</p>
</td>
<td valign="top" width="161">
<p class="Default">±1.5%±3digit</p>
</td>
<td valign="top" width="142">
<p class="Default">10KΩ</p>
</td>
</tr>
<tr>
<td rowspan="5" valign="top" width="194">
<p class="Default">Capacitance</p>
</td>
<td valign="top" width="142">
<p class="Default">40.00nF</p>
</td>
<td rowspan="5" valign="top" width="161">
<p class="Default">±1%±1digit</p>
</td>
<td valign="top" width="142">
<p class="Default">10pF</p>
</td>
</tr>
<tr>
<td valign="top" width="142">
<p class="Default">400.0nF</p>
</td>
<td valign="top" width="142">
<p class="Default">100pF</p>
</td>
</tr>
<tr>
<td valign="top" width="142">
<p class="Default">4.000uF</p>
</td>
<td valign="top" width="142">
<p class="Default">1nF</p>
</td>
</tr>
<tr>
<td valign="top" width="142">
<p class="Default">40.00uF</p>
</td>
<td valign="top" width="142">
<p class="Default">10nF</p>
</td>
</tr>
<tr>
<td valign="top" width="142">
<p class="Default">400.0uF</p>
</td>
<td valign="top" width="142">
<p class="Default">100nF</p>
</td>
</tr>
<tr>
<td valign="top" width="194">
<p class="Default"> </p>
</td>
<td colspan="3" valign="top" width="444">
<p class="Default">Attention:The smallest capacitance value that can be measured is 5nF.</p>
</td>
</tr>
<tr>
<td valign="top" width="194">
<p class="Default">Diode</p>
</td>
<td colspan="3" valign="top" width="444">
<p class="Default">0V~2.0V</p>
</td>
</tr>
<tr>
<td valign="top" width="194">
<p class="Default">On-off Test</p>
</td>
<td colspan="3" valign="top" width="444">
<p class="Default">< 30Ω</p>
</td>
</tr>
</tbody>
</table>
<p><strong> </strong></p>
<p><strong>Linux Feature</strong></p>
<table border="1" cellspacing="0" cellpadding="0">
<tbody>
<tr>
<td valign="top" width="194">
<p class="Default">Kernel Version</p>
</td>
<td valign="top" width="444">
<p class="Default">Linux2.6.30.4</p>
</td>
</tr>
<tr>
<td valign="top" width="194">
<p class="Default">Supported File system</p>
</td>
<td valign="top" width="444">
<p class="Default">Yaffs, Fat32</p>
</td>
</tr>
<tr>
<td valign="top" width="194">
<p class="Default">Drivers</p>
</td>
<td valign="top" width="444">
<p class="Default">Sound Driver, Buzzer Driver, FPGA Driver, SPI Driver, USB Host Driver, LCD Driver, USB massstorage、gadget Driver</p>
</td>
</tr>
<tr>
<td valign="top" width="194">
<p class="Default">Linux Applications</p>
</td>
<td valign="top" width="444">
<p class="Default">busybox1.18.4, mplayer, watchdog, gnupg1.4.11</p>
</td>
</tr>
<tr>
<td valign="top" width="194">
<p class="Default">U_boot Version</p>
</td>
<td valign="top" width="444">
<p class="Default">u-boot-1.1.6</p>
</td>
</tr>
<tr>
<td valign="top" width="194">
<p class="Default">Sourcecode download website</p>
</td>
<td valign="top" width="444">
<p class="Default">www.hantek.com/download/handscope.zip</p>
</td>
</tr>
</tbody>
</table>
Be the first to review “DSO 1202S”

Your email address will not be published. Required fields are marked *

Reviews

There are no reviews yet.

Customers who bought this item also bought

Related products

Main Menu