DSO 1062S

Hantek DSO 1062S (60 MHz) Digital Handheld Oscilloscope

Impressive design, intuitive control and high-resistance finish make oscilloscopes in the 1000S series useful aiders not only in field work, but also in hard industrial conditions. All Hantek oscilloscopes offer a great price/performance ratio at the low-end segment of measuring technology and the DSO 1062S is no exception. The advantages of Hantek Handheld over its rival products are the more than five times larger sampling memory, very good interference resistance, more accurate mulitmeter offering a larger number of ranges, a higher quality color display with a longer diagonal 5.6“ (14.5 cm), intuitive control and a long lasting battery (6 hours for a single recharge).

DSO 1062S – main features:

• • Isolated Channels
  • Bandwidth: 60 MHz

• Rise Time: 5.8ns
• Sampling rate: 1 GS/s
• Record Length: 1M
• Measurement record storage (supports bitmap and CSV format)
• USB Host: support removeable disk
• Zoom function

Package contents:

• This is a handheld digital storage oscilloscope, the Hantek DSO 1062S. It comes with two passive probes with 60 MHz bandwidth, a set of test probes for a multimeter, a 1.2-meter USB 2.0 connecting cable, a power adapter, and a high-quality nylon bag.

The oscilloscope has a sample rate range of 1 GS/s and uses (sin x)/x waveform interpolation. It has a maximum record length of 1 M samples per single channel or 512 K samples per dual channel (4 K, 16 K, 40 K optional). The time/div range is from 4 ns/div to 40 s/div, in a 2, 4, 8 sequence. The sample rate and delay time accuracy is ±50 ppm over any ≥1 ms time interval.

The delta time measurement accuracy (full bandwidth) is ±(1 sample interval + 100 ppm × reading + 0.6 ns) for single-shot normal mode and >16 averages is ±(1 sample interval + 100 ppm × reading + 0.4 ns). The position range for the DSO 1062B is from 4 ns/div to 8 ns/div, 20 ns/div to 80 μs/div, 200 μs/div to 40 s/div, and 2 ns/div to 10 ns/div.

The A/D converter has 8-bit resolution, and each channel is sampled simultaneously. The VOLTS range is from 2 mV/div to 5 V/div at the input BNC. The position range is from 2 mV/div to 200 mV/div, ±2 V for >200 mV/div to 5 V/div, and ±50 V. The analog bandwidth in normal and average modes at BNC or with a probe, DC coupled is 2 mV/div to 20 mV/div, ±400 mV, 50 mV/div to 200 mV/div, ±2 V, 500 mV/div to 2 V/div, ±40 V, and 5 V/div, ±50 V. The selectable analog bandwidth limit is typical at 20 MHz. The low-frequency response (-3dB) is ≤10 Hz at BNC. The rise time at BNC is typical, with less than 5.8 ns. The DC gain accuracy is ±3% for normal or average acquisition mode, 5 V/div to 10 mV/div, and ±4% for normal or average acquisition mode, 5 mV/div to 2 mV/div. The DC measurement accuracy, average acquisition mode, is ±(3% × reading + 0.1 div + 1 mV) when 10 mV/div or greater is selected for measurement type: Average of ≥16 waveforms with vertical position at zero.
Pulse Width Trigger ModeTrigger when < (Less than), > (Greater than), = (Equal), or ≠ (Not Equal); Positive pulse or Negative pulsePulse Width Trigger PointEqual: The oscilloscope triggers when the trailing edge of the pulse crosses the trigger level.
Not Equal: If the pulse is narrower than the specified width, the trigger point is the trailing edge. Otherwise, the oscilloscope triggers when a pulse continues longer than the time specified as the Pulse Width.
Less than: The trigger point is the trailing edge.
Greater than (also called overtime trigger): The oscilloscope triggers when a pulse continues longer than the time specified as the Pulse Width.

Acquisition

Inputs

Measurements

General Specifications

Meter Mode

Meter Specification