PROFISET BASIC 3064 CZ

719,00 

100 in stock

Profiset BASIC 3064 – Four-channel digital oscilloscope automotive HANTEK 3064 (60 MHz) without arbitrary waveform generator.

Compare
SKU: HT03118 Categories: ,

Profiset BASIC 3064

Profiset BASIC is primarily intended for beginners and all those interested in digital oscilloscope with a decent base, who do not want to invest more than you need and accessories they want to buy up gradually.

With profiset you can perform the following types of diagnostic tests:
• Diagnosis sensor such as the speed sensor (crank, cam) , Lambda probe, MAF sensor , MAP sensor, etc. 
• Diagnostics actuators – potentiometer throttle position sensor and the test EGR valve , etc.
• Diagnosis of the primary circuit of the ignition – the current measurement is necessary to buy a current clamp
• Diagnosis of secondary ignition circuit – for diagnosis of fully electronic ignition is necessary to buy an diagnostic adapter coil-ignition plug.
• Diagnosis of low-voltage components
• Diagnosis of high-voltage components
• CAN-BUS test
• LIN test communication

For this kit are available expansion communication modules LAN and WIFI for an additional fee 2690 CZK without VAT. You can also buy a three year warranty 1490 CZK without VAT. As part of the extension of the other accessories you can take advantage specials accessory sets..If you have interest in designing profiset, please use directly individual configuration. The advantage of individual configuration is particularly favorable price, more information about individual configuration you can found here. In case you do not use built-in oscilloscope waveform generator, you can purchase this set with a design of an oscilloscope 3064A with arbitrary waveform generator – see the product Profiset BASIC 3064.

Accessories in profiset:

1x DSO 3064
4x Attenuator 20:1 Hantek details
4x Capacitive clamp secondary ignition circuit Hantek® details
4x BNC Profesional 3m Hantek® (2x4mm) details
2x Set 2 pieces of large alligator clips (4 mm ) for measuring cable HANTEK ® details
1x Set 2 pieces measuring spikes – multimeter type (4 mm ) for measuring cable HANTEK ® details
1x Set 5 pieces measuring 0.9 mm needle -tipped HANTEK ® for measuring cable HANTEK ® details
1x Passive Probe 60MHz HANTEK PP80 (CAT-II) details
1x Cable BNC – Gatorclip 0.45 M ® Professional HANTEK details
1x Connection cable 2m USB 2.0
1x Installation CD with software
1x Manual in English – Detailed operating instructions for the program
1x Manual in English – Technical documentation for the preset measurement
1x Manual in English – Basic concepts of oscilloscopes
1x Manual in English – Instructions for safe work with a digital oscilloscope
1x Power Adapter Telca FKS308HSC
1x CL adapter HANTEK® details
1x High quality nylon bag – HANTEK®

Hantek 3064 – 4-channel autoscope without waveform generator
The four-channel digital oscilloscope HANTEK 3064 without arbitrary waveform generator dispose of external trigger and ability to connect to PC through the USB port.

What do need a digital oscilloscope for?

There is no measuring or diagnostic device which would be able to replace the digital oscilloscope for electrical part tests. Many defects which are hidden and undetectable for series (OBD) diagnostics are easily identifiable for the oscilloscope. With a digital oscilloscope you will start detecting instead of guessing the faults. Mastering parallel diagnostics using a digital oscilloscope, although at a basic level, may be a competitive advantage which will make more and more customers return to you.

Preset Measurements Database
To help beginning diagnosticians the programme contains a database of more than 80 preset sensor and actuator waveforms. The waveforms database is divided into 5 sections:

Ignition circuits
Sensors and actuators
CAN-BUS/LIN-BUS tests
Injection jet tests
Charging circuits and compression tests

After selecting a car part from an easy-to-use menu, the programme will automatically set up the oscillocope for measurement and display the required waveform on raster background.

Compatibility with Automobiles

The oscilloscope is a device which is used solely for watching various electrical phenomena (signals) as a function of time. When using the oscilloscope in automobiles there is no restriction in terms of compatibility with an electrical part – a sensor or actuator. An oscillocsope may be used equally well for making measurements in cars, lorries or motorcycles. Everything is a question of operating the oscilloscope correctly, i.e. setting it up and connecting it to the part being diagnosed.

Favorable price – optimal performance

Hantek comes with an alternative and offers a balanced price/performance ratio. Measuring technology development and production are marching in seven-league boots, and everybody knows computer technology prices have fallen sharply in the last decade. Measuring technology is no exception. Hantek offers an inexpensive and high quality solution, although not a perfect one. Hantek oscilloscopes are accessible to any car mechanic. After getting some practical experience and mastering certain basic skills every mechatronics enthusiast will surely purchase an expensive and perfect oscilloscope and what´s more, will not be afraid to use it.

Programme and Updates

The programme user environment is intuitive and friendly even for less experienced users. The programme licence is not limited to a single computer. For more information go to the technical support pages hantek.cz

Package contents
Package includes:
1x DSO 3064
4x Attenuator 20:1 Hantek
4x BNC Profesional 3m Hantek® (2x 4mm) 
4x Capacitive clamp secondary ignition circuit Hantek®
1x Set 2 pieces of large alligator clips (4 mm ) for measuring cable HANTEK ®
1x Set 2 pieces measuring spikes – multimeter type (4 mm ) for measuring cable HANTEK ®
1 Set 5 pieces measuring 0.9 mm needle -tipped HANTEK ® for measuring cable HANTEK ®
1x Cable BNC – Gatorclip 0.45 M ® Professional HANTEK
1x Connection cable 2 m USB 2.0
2 Passive Probe 60MHz HANTEK PP80 (CAT-II)
1x Installation CD with software
1x Manual in English – Detailed operating instructions for the program
1x Manual in English – Technical documentation for the preset measurement
1x Manual in English – Basic concepts of oscilloscopes
1x Manual in English – Instructions for safe work with a digital oscilloscope 
1x Power Adapter Telca FKS308HSC
1x CL adapter HANTEK ®
1x High quality nylon bag – HANTEK ®
Note

Individual offers and product sheets 

Not decided you? Need more information? Feel free to call us toll free 800 66 44 66 or contact us via e-mail and we will be pleasantly happy to answer all your questions. Within individual configuration for a good price we will send you a detailed quote including technical specifications. More information can be found in Individual configuration


Additional information

Weight 1 kg
Model

Warranty

Parameters

<table border="0" cellspacing="0" cellpadding="0">
<tbody>
<tr>
<td width="171" height="21">Model</td>
<td width="104"><a href="http://www.hantek.com/en/ProductDetail_138.html&quot; target="_blank">DSO3062AL</a></td>
<td width="104"><a href="http://www.hantek.com/en/ProductDetail_139.html&quot; target="_blank">DSO3062L</a></td>
<td width="104"><a href="http://www.hantek.com/en/ProductDetail_137.html&quot; target="_blank">DSO3062A</a></td>
<td width="104"><a href="http://www.hantek.com/en/ProductDetail_114.html&quot; target="_blank">DSO3064A</a></td>
<td width="104"><a href="http://www.hantek.com/en/ProductDetail_115.html&quot; target="_blank">DSO3064</a></td>
</tr>
<tr>
<td colspan="6" width="691" height="20">VERTICAL</td>
</tr>
<tr>
<td width="171" height="20">Analog Channels</td>
<td width="104">2</td>
<td width="104">2</td>
<td width="104">2</td>
<td width="104">4</td>
<td width="104">4</td>
</tr>
<tr>
<td width="171" height="20">Bandwidth</td>
<td width="104">60MHz</td>
<td width="104">60MHz</td>
<td width="104">60MHz</td>
<td width="104">60MHz</td>
<td width="104">60MHz</td>
</tr>
<tr>
<td width="171" height="20">Rise Time</td>
<td width="104">5.8ns</td>
<td width="104">5.8ns</td>
<td width="104">5.8ns</td>
<td width="104">5.8ns</td>
<td width="104">5.8ns</td>
</tr>
<tr>
<td width="171" height="20">Input Impedance</td>
<td colspan="5" width="520">Resistance: 1MΩ; Capacitance: 25 pF</td>
</tr>
<tr>
<td width="171" height="20">Input Sensitivity</td>
<td colspan="5" width="520">10mV/div to 5V/div</td>
</tr>
<tr>
<td width="171" height="20">Input Coupling</td>
<td colspan="5" width="520">AC/DC/GND</td>
</tr>
<tr>
<td width="171" height="20">Vertical Resolution</td>
<td colspan="5" width="520">8 bits</td>
</tr>
<tr>
<td width="171" height="20">Memory Depth</td>
<td colspan="5" width="520">10K-16M/CH</td>
</tr>
<tr>
<td width="171" height="20">Maximum Input</td>
<td colspan="5" width="520">400V (DC+AC Peak)</td>
</tr>
<tr>
<td colspan="6" width="691" height="20">HORIZONTAL</td>
</tr>
<tr>
<td width="171" height="17">Real-Time Sampling Rate</td>
<td width="104">200MS/s</td>
<td width="104">200MS/s</td>
<td width="104">200MS/s</td>
<td width="104">200MS/s</td>
<td width="104">200MS/s</td>
</tr>
<tr>
<td width="171" height="20">Time Base Range</td>
<td colspan="5" width="520">5ns/div to 1000s/div(1-2-5 sequences)</td>
</tr>
<tr>
<td width="171" height="20">Time Base Precision</td>
<td colspan="5" width="520">±50ppm</td>
</tr>
<tr>
<td colspan="6" width="691" height="20">TRIGGER</td>
</tr>
<tr>
<td width="171" height="20">Source</td>
<td colspan="2" width="208">CH1, CH2,EXT,D0-D15</td>
<td width="104">CH1, CH2,EXT</td>
<td colspan="2" width="208">CH1, CH2,CH3,CH4,EXT</td>
</tr>
<tr>
<td width="171" height="20">Mode</td>
<td colspan="5" width="520">Edge,Pulse,Video,Alternative</td>
</tr>
<tr>
<td width="171" height="39">Auto Measurement</td>
<td colspan="5" width="520">Vpp, Vamp, Vmax, Vmin, Vtop, Vmid, Vbase, Vavg, Vrms, Vcrms, Preshoot, Overshoot, Frequency, Period, Rise Time, Fall Time, Positive Width, Negative Width, Duty Cycle</td>
</tr>
<tr>
<td width="171" height="22">Cursors Measurement</td>
<td colspan="5" width="520">Cross, Trace, Horizontal, Vertical</td>
</tr>
<tr>
<td width="171" height="20">Waveform Signal Process</td>
<td colspan="5" width="520">+,- , x,÷, FFT, Invert</td>
</tr>
<tr>
<td width="171" height="53">Voltage Range</td>
<td colspan="5" width="520">10mV to 5V/div @ x 1 probe; 100mV to 50V/div @ x 10 probe;<br />1V to 500V/div @ x 100 probe; 10V to 5000V/div @ x 1000 probe; <br />100V to 50000V/div @ x 10000 probe;  200mV to 100V/div @ 20:1</td>
</tr>
<tr>
<td width="171" height="22">Current Range</td>
<td colspan="5" width="520">CC65(20A),CC65(60A),CC650,CC1100</td>
</tr>
<tr>
<td width="171" height="24">FFT</td>
<td colspan="5" width="520">Rectangular, Hanning, Hamming, Blackman Window</td>
</tr>
<tr>
<td width="171" height="23">Math</td>
<td colspan="5" width="520">Adition, subtraction, multiplication, division</td>
</tr>
<tr>
<td colspan="6" width="691" height="24">Logic Analyzer</td>
</tr>
<tr>
<td width="171" height="23">High input impendence</td>
<td colspan="2" width="208">200K(C=10p)</td>
<td width="104">–</td>
<td width="104">–</td>
<td width="104">–</td>
</tr>
<tr>
<td width="171" height="23">Input Voltage range</td>
<td colspan="2" width="208"> -60V~60V </td>
<td width="104">–</td>
<td width="104">–</td>
<td width="104">–</td>
</tr>
<tr>
<td width="171" height="23">Logic threshold range</td>
<td colspan="2" width="208"> -6~6V </td>
<td width="104">–</td>
<td width="104">–</td>
<td width="104">–</td>
</tr>
<tr>
<td width="171" height="19">Max Sample Rate</td>
<td colspan="2" width="208">100MHz</td>
<td width="104">–</td>
<td width="104">–</td>
<td width="104">–</td>
</tr>
<tr>
<td width="171" height="19">Bandwidth</td>
<td colspan="2" width="208">10MHz</td>
<td width="104">–</td>
<td width="104">–</td>
<td width="104">–</td>
</tr>
<tr>
<td width="171" height="36">Compatible input</td>
<td colspan="2" width="208">TTL, LVTTL, CMOS,<br /> LVCMOS,ECL, PECL, EIA</td>
<td width="104">–</td>
<td width="104">–</td>
<td width="104">–</td>
</tr>
<tr>
<td width="171" height="25">Storage depth</td>
<td colspan="2" width="208">10K-16M/CH</td>
<td width="104">–</td>
<td width="104">–</td>
<td width="104">–</td>
</tr>
<tr>
<td colspan="6" width="691" height="19">Arbitrary Waveform Generator Mode</td>
</tr>
<tr>
<td width="171" height="20">Waveform Frequency</td>
<td width="104">DC~25MHz</td>
<td width="104">–</td>
<td colspan="2" width="208">DC~25MHz</td>
<td width="104">–</td>
</tr>
<tr>
<td width="171" height="34">DAC</td>
<td width="104">2K~200MHz adjustable</td>
<td width="104">–</td>
<td colspan="2" width="208">2K~200MHz adjustable</td>
<td width="104">–</td>
</tr>
<tr>
<td width="171" height="19">Frequency Resolution</td>
<td width="104">0.10%</td>
<td width="104">–</td>
<td colspan="2" width="208">0.10%</td>
<td width="104">–</td>
</tr>
<tr>
<td width="171" height="19">Channel</td>
<td width="104">1CH</td>
<td width="104">–</td>
<td colspan="2" width="208">1CH waveform output</td>
<td width="104">–</td>
</tr>
<tr>
<td width="171" height="19">Waveform Depth</td>
<td width="104">4KSa</td>
<td width="104">–</td>
<td colspan="2" width="208">4KSa</td>
<td width="104">–</td>
</tr>
<tr>
<td width="171" height="19">Vertical Resolution</td>
<td width="104">12 bit</td>
<td width="104">–</td>
<td colspan="2" width="208">12 bit</td>
<td width="104">–</td>
</tr>
<tr>
<td width="171" height="20">Frequency Stability</td>
<td width="104"><30ppm</td>
<td width="104">–</td>
<td colspan="2" width="208"><30ppm</td>
<td width="104">–</td>
</tr>
<tr>
<td width="171" height="24">Wave Amplitude</td>
<td width="104">±3.5V Max.</td>
<td width="104">–</td>
<td colspan="2" width="208">±3.5V Max.</td>
<td width="104">–</td>
</tr>
<tr>
<td width="171" height="20">Output Impedance</td>
<td width="104">50 Ω</td>
<td width="104">–</td>
<td colspan="2" width="208">50 Ω</td>
<td width="104">–</td>
</tr>
<tr>
<td width="171" height="19">Output Current</td>
<td width="104">50mA</td>
<td width="104">–</td>
<td colspan="2" width="208">50mA Ipeak=50mA</td>
<td width="104">–</td>
</tr>
<tr>
<td width="171" height="19">System BW</td>
<td width="104">25M</td>
<td width="104">–</td>
<td colspan="2" width="208">25M</td>
<td width="104">–</td>
</tr>
<tr>
<td width="171" height="32">Harmonic Distortion</td>
<td width="104">-50dBc(1KHz),<br />-40dBc(10KHz)</td>
<td width="104">–</td>
<td colspan="2" width="208">-50dBc(1KHz),  -40dBc(10KHz)</td>
<td width="104">–</td>
</tr>
<tr>
<td width="171" height="19">INTERFACE</td>
<td colspan="5" width="520">USB  2.0 (Lan Optional)</td>
</tr>
<tr>
<td width="171" height="19">POWER SOURCE</td>
<td colspan="5" width="520">8–36V Wide range of input voltage, suitable </td>
</tr>
<tr>
<td width="171" height="26">Volume</td>
<td colspan="5" width="520">255 x 190 x 45 (mm)</td>
</tr>
<tr>
<td width="171" height="21">Weight</td>
<td colspan="5" width="520">1Kg</td>
</tr>
</tbody>
</table>

Be the first to review “PROFISET BASIC 3064 CZ”

Your email address will not be published. Required fields are marked *

Reviews

There are no reviews yet.

Main Menu